GIR 2002
UNIVERSAL DISPLAY WITH 2 RELAY OUTPUTS
The GIR 2002 has freely selectable inputs, the user can choose between voltage, current, RTD's, thermocouples, frequency or counter inputs. It also has a build in power supply for 4-20 mA transmitters and reads out in engineering units. Exceptionally for panel meters of this price is the display that reads up to 9999 digits. Via front side sealed buttons one can set the alarm or set point value and the hysteresis of the relay outputs. An interesting option is the analog output. The GIR 2002 offers also min/max value, input signal filter and RS485 interface for long time recording and logging.
[Click to enlarge]
| Inputs: | 0 to 20 mA and 4 to 20 mA (Ri = 50 Ohms) 0 to 50 mV, 1 V, 2V (Ri = 30 kOhms) 0 to 10 V (Ri = 300 kOhms) Pt100 -200...+850 / -70.0...+250.0 °C Pt1000 -200...+850 °C Thermocouple type J,K,N,S,T. Frequency 0.000 Hz...10 kHz RPM 0.000...9999 Counter: 0...9999 (1.000.000 with prescaler 1...1000) |
| Measuring speed: | 10 milli sec for V and mA 250 msec for temperature digit, freely adjustable |
| Resolution: | place decimal point freely adjustable |
| Accuracy unit: | V and mA: +/- 0.2 % +/- 1
digit Temperature: 0.2...0.5 %FS +/-1 digit |
| Power for sensor: | 18 Volt dc +/- 5%, 20 mA, electrically isolated |
| Min/max memory, filter with 3 signal filter settings. Fault indication for probe damage, short circuit, values out of range. | |
| Interface: | Easybus, 16 units linkable with 2 conductor cable |
| Set point: | Via front side buttons |
| Hysteresis: | Freely adjustable, minimum 1 digit |
| Relay: | 1 Volt free change over 10 A
(Ohmic) 250 Vac 1 Volt free closing, 5 A (Ohmic), 250 Vac |
| Display: | 4 digit |
| Working temp: | 0 to 50° C |
| Power: | 230 Vac 50/60 Hz, approx 3 VA |
| Dimensions: | 48 x 96 x 100 mm |
| Panel cut out: | 43 x 90.5 mm |
| Accessories: | EBW1:
interface EBS9M: software 9 channels |
| Note: | Software: see sensors and accessories |
| Option: | TARE: Tare
function (Zero the indicated value) 12 VDC: power supply 12 Vdc 24 VDC: power supply 24 Vdc 12 VAC: power supply 12 Vac 24 VAC: power supply 24 Vac 115 VAC: power supply 115 Vac ANAOUT 420A: freely adjustable 4-20 mA output ANAOUT 010V: freely adjustable 0-10 V output Note: ANAOUT only with AC power supply, ANAOUT is electrically isolated |
| Prices: | GIR2002 | 149.40 EURO |
| EBW1 | 66.50 EURO | |
| EBS9M | 45.90 EURO | |
| 12VDC | 21.50 EURO | |
| 24VDC | 21.50 EURO | |
| 12VAC | 8.80 EURO | |
| 24VAC | 8.80 EURO | |
| 115VAC | 8.80 EURO | |
| ANAOUT420 | 46.80 EURO | |
| ANAOUT020 | 46.80 EURO | |
| ANAOUT010 | 46.80 EURO |
AMRA BVBA
KLEIN HEIKEN 6
B-2950 KAPELLEN
BELGIUM
Tel: +32 3 605 49 74
Fax: +32 3 665 38 02
E-mail: sales@amra.be