GMUD-H
DIFFERENTIAL LOW PRESSURE TRANSMITTER
The GMUD-H is a differential pressure transmitter used when air pressures above 25 mbar are to be measured. It converts the applied pressure to a standard electrical signal, normally 4-20 mA. The 1100 mbar absolute can be used as a barometer. Applications are found in the climatic/ventilation sector and in filter pollution monitoring.
| Relative ranges: | 0...70 mbar, 0...2 bar, 0...10 bar over-, under- or differential pressure |
| Overpressure: | 70 mbar:max 1.3 bar, 2 bar:max 4 bar, 10 bar:max 13 bar |
| Output: | 4 to 20 mA (Two wire, load 12 Volt) |
| Accuracy sensor: | +/- 0.2% FS hysteresis and linearity typ |
| Temperature drift: | +/- 0.4% FS/50°C |
| Pressure media: | Dry, non corrosive/aggressive gases, not suited for liquids |
| Power supply: | 12...35 Vdc |
| Pressure connection: | Studs for plastic tube 6 x 1 mm (4 mm int. diam.) |
| Temperature range: | 0...70 °C |
| Dimensions: | 82 x 80 x 56 mm, + connections |
| Electrical connection: | DIN 43650 |
| Options: |
RANGE10B: Other ranges, e.g. 0...100 mbar, -1...+4 bar, etc. AV010: Voltage output 0...10 Volt (Power supply 18...30 Vdc VO: Build in display (Power supply 17...30 Vdc |
| Prices: | GMUD-H | 134.90 EURO |
| RANGE10B | 18.80 EURO | |
| AV010 | 18.40 EURO | |
| VO | 64.70 EURO |