GTMU-3
Pt100 / THERMOCOUPLE TEMPERATURE TRANSMITTER FOR WALL MOUNTING
The GTMU-3 temperature transmitter measures room temperature and converts it to an electrical signal, normally 4-20 mA. It exists in a Pt100 and a thermocouple version and lots of options are available to make it ideally suited for every application. The impact resistant IP65 ABS housing and the (optionally) lacquered electronics permit outdoor use.
[Click to enlarge]
| Sensor: | Pt100, 3 wire Type K (NICr-NiAl) thermocouple |
| Range: | Pt100: 0 to 100
°C, 0 to 200 °C, -50 to 50 °C, -50 to 150 °C NiCr-NiAl: 0 to 100 °C, 0 to 600 °C, 0 to 1200 °C, -50 to 150 °C, -200 to 300 °C |
| Supply: | 12 to 30 Vdc (4
to 20 mA) 18 to 30 Vdc (0 to 10 Volt) |
| Accuracy: | Pt100: DIN class
B (+/- 0.3 °C)+/- 0.2% FS NiCr-NiAl: +/-0.2 °C +/-0.5 °C |
| Output: | 4 to 20 mA two wire, load 12 Volt |
| Working temp: | 0 to 70 °C |
| Dimensions: | 80 x 82 x 55 mm + connector + sensor |
| Sensor: | Length 100 mm, diameter 5 mm |
| Options: | LFL: Longer
sensor length PLAC: Lacquered electronics for humidity protection IMPACC1-2: Improved accuracy +/- 0.15 °C (Pt100) IMPACC1-3: Improved accuracy +/- 0.1 °C (Pt100) IMPACC1-10: Improved accuracy +/- 0.03 °C (Pt100) 010V: 0 to 10 Volt output RANGE: Other ranges, minimum span 100 ° C, please specify when ordering |
| Note: | Improved accuracy figures
are accuracy of sensor at 0 °C. LFL price is upcharge for every 100mm of sensor Special range or special output: Upcharge only once per instrument |
| Prices: | GTMU-3 | 104.50 EURO |
| LFL | 3.20 EURO /100 MM | |
| PLAC | 9.70 EURO | |
| IMPACC1-2 | 9.10 EURO | |
| IMPACC1-3 | 13.80 EURO | |
| IMPACC1-10 | 44.10 EURO | |
| 010V | 18.40 EURO | |
| RANGE | 6.70 EURO |
AMRA BVBA
KLEIN HEIKEN 6
B-2950 KAPELLEN
BELGIUM
Tel: +32 3 605 49 74
Fax: +32 3 665 38 02
E-mail: sales@amra.be