GTP-H
Pt100 TEMPERATURE TRANSMITTER FOR DIN RAIL MOUNTING
The GTP-H temperature transmitter converts a two or three wire Pt100 signal to an electrical signal, normally 4-20 mA. The unit mounts on a 35 mm top hat DIN rail and has a very small pitch of only 22.5 mm, admitting large packing density.
[Click to enlarge]
| Input: | 3 wire Pt100 |
| Range: | Pt100: between -200 to 800 °C |
| Standard range: | 0 to 100 °C 0 to 200 °C -50 to 50 °C -50 to 150 °C |
| Power supply: | 12 to 30 Vdc
(4-20 mA output) 18 to 30 Vdc (0 to 10 V output) |
| Accuracy: | +/- 0.3 % |
| Output: | 4 to 20 mA two wire, load 12 Volt |
| Working temp: | 0 to 70 °C |
| Housing: | Snap on housing for 35 mm DIN rail, width 22.5 mm |
| Options: |
010OUT: 0 to 10 Volt output RANGE: other ranges, please specify when ordering, minimum span 100 °C PLAC: Lacquered electronics for humidity protection |
| Note: | Special range or special output: upcharge only once per instrument. |
| Prices: | GTP-H | 84.60 EURO |
| 010OUT | 18.80 EURO | |
| RANGE | 6.70 EURO | |
| PLAC | 9.70 EURO |
AMRA BVBA
KLEIN HEIKEN 6
B-2950 KAPELLEN
BELGIUM
Tel: +32 3 605 49 74
Fax: +32 3 665 38 02
E-mail: sales@amra.be